Make Sure To Do These 5 Things To Avoid Refrigerator Repairs

A refrigerator is an appliance in our home that is most susceptible to damage, that is if we don’t take proper care of our refrigerator. So, here are some of the best maintenance tips to help you avoid refrigerator repairs in the long run.

Clean the Condenser Coils

Many experts suggest that only following this step is enough to save around 70% of the refrigerator repair costs in the long run. But if you ignore this simple yet effective step, you’ll end up with a broken refrigerator pretty soon.

How often? Well, once or twice a year should be more than enough to keep the condenser clean. These coils do the most important work inside the refrigerator, they make the refrigerant cold enough to make the temperature inside the two main parts low. But if the coils are surrounded by dirt and other things from their surroundings, they might not be able to release the heat as efficiently as they do in an ideal scenario.

For cleaning the condenser, you can invest in a coil cleaning brush made and sold just for this purpose. Additionally, use a vacuum to such out the particles from inside the refrigerator. Keep the brush handy, as it can also be used to clean a lot of other parts of the appliance too. However, if your refrigerator or condenser is not working properly, call an appliance repair expert.

Clean the Condenser Fan Too

If your fridge does have a fan, it’d be located right next to the coils (mentioned in the first heading). The main purpose of this fan is to keep the air flowing inside the appliance to get the heat generated by the coils out of the refrigerator and replace it with fresh air. The fan keeps the coils cool, but since it’s usually located close to the floor, it might attract some dust or paper particles only to decrease its rotations and effectiveness. In these situations, the fan can even stop working altogether, and you won’t even notice it.

The fan can also be located next to the condenser in a lot of models. So, you can clean the fan effectively with the help of the coil brush we used in the previous step. The brush can prove to be helpful as it is small and slim.

Keep the Door Gasket Clean

A gasket is the component of your refrigerator that might look like an unimportant one, but in reality, it prevents the leakage of cold air from your refrigerator, and thus, can save you a lot of money in the form of extra energy bills.

But all these benefits of the gasket can only be reaped if you keep the gasket clean of any dust and other sticky substances. A lot of things that drip in our refrigerator can get frozen on the gasket. If not cleaned properly, your gasket might even tear. On the other hand, a clean gasket can help you save a lot of energy by keeping the system properly sealed and insulated.

So, you should keep the gasket of your refrigerator clean by giving it a nice rub once a month. Maintenance costs nothing in this case, but it can save you a lot in the long term.

Make Sure the Vents Are Cleaned

In frost-free refrigerators, there are small vents that allow the air from outside to circulate through the refrigerator. Since vents are open areas inside your refrigerator, they are most likely to have a lot of stuff accumulating in them. So, you need to keep the vents fully open to let the system work properly.

An additional tip, you can save some energy in frost-free refrigerators. You’ll just need to fill the refrigerator 3/4th at a maximum, as the air also needs to circulate through the refrigerator to keep it working properly.

Adjust the Thermostat

This step is to help improve the efficiency of your refrigerator by using it properly, you can also save some electricity this way. You can adjust the temperature control of your freezer and let it run at around 38° to 42° Fahrenheit to achieve energy efficiency and also keep your food reasonably cool. This way, the components of your freezer won’t be under any pressure and it’ll certainly enjoy an extended life.

Most importantly, when you need an expert help, hire a refrigerator ice maker repair Alexandria company that is trustworthy to avoid getting overcharged.

Leave a Reply

Your email address will not be published. Required fields are marked *