Aluminum NRS Stern Rowing Frame

Stern Frame Parts List: (2) Bent Side Rails (1) Seat Bar (1) Foot Bar (6) U-bolts (12) Washers and Locking Nuts (1) Frame Wrench (1) Pair of Tall Oar Mounts Standard padded seat with bolts and washers Note: Seat is packaged separately

Instructions:

1. Lay out the frame parts as shown in the image above.
    
2. Set the side rails on the seat and foot bars and install the U-bolts. Add the washers and nuts leaving them loose. If either of the bars need to be re-positioned, it may be necessary to remove the U-bolts to make adjustments.
    
3. Make sure side marked \"Front\" on the seat plate faces forward.
    
4. Add the seat and oar mounts.
    
5. Check to be sure that all of the U-bolts are tight. Periodically check the tightness of all nuts and bolts.