Recretec aluminum dry boxes are 16" front to back by 16" tall, or 13" front to back by 16" tall, dry boxes between 36" and 44" in length, with an adjustable seat bracket for the rower mounted on the lid. The seat slides front to back on tracks to accommodate rowers of various heights. Seat is not included please choose your seat option below. Unique "Channel-Lip" lids set Recretec Dry Boxes and Kitchen Boxes apart. The lids have a squared contact surface formed by bending the aluminum back under and up, making it stronger than traditional "shoe box" lid style and less likely to gap when torque is applied heavy whitewater. Lids have a foam seal, and are attached with full length piano hinge, and a pair of spring-loaded latches keeps them securely closed. Recretec boxes are made of .080" thick 5052 marine aluminum with bottom bends and smooth Heli-arc welded outside corners. Handles and mounting systems are designed to fit a variety of rowing frames. We do not recommend attaching a seat to the kitchen dry box, as it tends to be to heavy for the box to stand up in camp. If you are ordering a custom sized dry box size please allow 4 to 6 weeks for delivery.
Note: The seat has been mounted on the dry box backwards for the ease of accessing your gear in the dry box from the rear of the boat. Ears are the hanging brackets, 2 on the front of the Box and 2 on the rear of the Box. Latched handles are the handle that is required with Recretec Aluminum frame. If you are not ordering that frame please choose the standard pressure handle. Standard swing handles are mounted on the side of the box for ease of lifting in and out of the raft. When ordering the seat mounted on the Dry Box you need the Slide seat adjustment as how the box mounts to the Dry Box, you must have it
Ears: are the hanging brackets, 2 on the front of the Box and 2 on the rear of the Box. Latched handles are the handle that is required with Recretec Aluminum frame. If you are not ordering that frame please choose the standard pressure handle. Standard pressure handles are mounted on the side of the box for ease of lifting in and out of the raft. The pressure handle keeps the handle from rattling as you go down the River.
Swing Handles: on either end of the dry box allowing for easy lifting in and out of your frame.
Latched Handles: are only used on Recretec Aluminum raft frame.
Specifications:
Heli-arc welded construction
Channel-Lip lid
Foam lid seal
Full length piano hinge
Spring-loaded latches
Sliding seat mount / Seat not included.
Seat option High Back $92.50 , Low Back seat $72.50
Custom sizes available
Available Options:
Add Ears To Your Box:
- Select One Ears from the Bottom of Box 9" Ears from the Bottom of Box 10" Ears from the Bottom of Box 11" Ears from the Bottom of Box 12"
Handles:
- Select One Standard Swing Handle Latch in Handles
Seat Mount:
- Select One Mount Seat Forward Mount Seat Backward
Seat Option:
- Select One High Back Drain Seat (+$92.50) Low Back Tractor Seat (+$72.50)
Size:
- Select Size 13" x 16" x 26" 13" x 16" x 36" 13" x 16" x 40" (+$50.00) 13" x 16" x 44" (+$50.00) 16" x 16" x 36" (+$77.00) 16" x 16" x 40" (+$77.00) 16" x 16" x 44" (+$77.00)