Inflatable Boat Sealant^® Stops Slow Leaks! 32 fluid oz.

Liquid Rubber® for Re-skinning Inland Marine Liquid Rubber® is truly a unique breakthrough in the rubber boat field. Very important to seal up all pin hole leaks before using Top Side paint. For the first time we are able to get 100% pure EPDM rubber in liquid form to cure without vulcanizing; that is applying high heat and pressure at the same time, which is what the manufacturer did when your boat was made. The consistency of honey, Liquid Rubber"paints" on to form a seamless, leakproof membrane of pure rubber.

Available in black, gray or white, one quart will renew a 10 foot boat with a coating 5-7 mils thick when applied according to the easy to follow instructions. (If you can paint a wall, you can do this.) Since the original skin of most inflatable boats is 5-6 mils thick, Liquid Rubber truly renews and restores your boat to its new condition, even if your boat has lost some of its outer skin and even if the fabric is showing through. Use Inland Marine Liquid Rubber Boat Sealant^® for all inflatable boats to spot repair or reinforce those heavy wear spots before they wear through, or re-skin the entire boat with Liquid Rubber Inflatable Boat Sealant Inflatable Boat Sealant to add years of serviceability to your boat.

How It's Used:

1. Sand (abrade) and clean the area to be treated.
2. Mix the Liquid Rubber with the catalyst provided.
3. Paint it on! Liquid Rubber will "flow" to form a smooth finish of pure rubber.
4. Turn the boat end over end and side to side, making sure that the entire interior is covered.
5. Dries to the touch in 24 hours cures completely in about seven days depending on conditions.

Tips For Liquid Rubber Restore your inflatable looks and reliability. Older inflatable boats can look and work like new. Liquid Rubber is designed to Re-Skin you inflatable boat, kayak, raft or tow toy. Years of use can wear the outer surface of your inflatable; abrasion and UV exposure can make your boat look bad and can cause slow leaks.

ABRASION and UV Damage Inland Marine Liquid Rubber® is truly a unique breakthrough in the inflatable boat repair industry. For the first time we are able to get 100% pure EPDM rubber in liquid form to cure without vulcanizing. Vulcanizing is the process manufactures use to manufacture your inflatable.

Liquid Rubber will adhere to your inflatable with the same reliability of vulcanizing but you do not need any heat. Just paint it on and it flows like honey, self levels for a smooth factory like finish.

When applied properly, Liquid Rubber provides a 4 to 6 mil think coating of rubber over the existing fabric and rubber on your inflatable. Liquid Rubber will provide your inflatable boat with years of new life.

Liquid Rubber can be used again and again in the future to restore your boats original look. Available in three (3) colors to help match you original inflatable skin color.

Colors: Black, Gray, White

Shipping Note This product is hazardous material and can only ship UPS Ground This will apply to all Glues, Adhesives and Paint. We cannot ship outside the US or to Alaska or Hawaii.