Inflatable Boat Sealant Stops Slow & Pinhole Leaks!

River Connection Sealent is specially formulated for use with PVC and Hypalon inflatable boats, rafts and tow toys. This sealant forms a bond with the interior fabric of the inflatable stopping or “sealing” slow leaks and inhibits future leaks from developing. In one easy step, leaks are cured from the inside which are virtually impossible to find from the outside. Inland Marine Sealant ^(r) is the only product of its kind which allows for future deflation of your inflatable (for storage, etc.) without the skin sticking to itself and making re-inflation virtually impossible.
 

How It's Used:

1. Deflate the boat.
2. Inject the liquid sealant into the air chambers through the valves.
3. Inflate the boat.
4. Turn the boat end over end and side to side, making sure that the entire interior is covered.
5. It's sealed and as good as new!

The time you used to spend pumping up the dinghy every few days you can now spend “bonding” with your crew, working on your tan, doing 12 oz. curls, or if you are really want to work, figuring out how to attach the charcoal grill to the life line without dropping parts overboard.

Tips

Recommended Safety Precautions

• Work in a well ventilated are (garage or shady area works well)
• Use a respirator and chemical resistant gloves (Nitrile

Boat Preparation

• Work area should be at least 60F
• Soap check for pinholes. Large high volume leaks will need to be repaired before sealing
• Remove any water that may be present in the tube. Dry tube to remove any residual moisture.

One quart seals a 12 foot boat. Now, if you want the outside to look and function as new, use our Top Side Paint.

.